Product Dimensions: 17” wide x 48” long x 9” high
Product Weight: 6 pounds

The Arm Guard Raptor Shield offers a unique solution to preventing raptor nesting problems without creating secondary eyesore problems. The arm guard was developed by utility personnel in the picturesque Chesapeake Bay
area where unsightly and or obtrusive animal guards were not considered a viable option. 

The sloped surface will automatically shed any nesting materials placed on the surface. The Arm Guard Raptor Shield is manufactured from a clear polymer which exhibits high resistance to outdoor weathering, impact resistance & UV degradation.

The unique design of the Conductor Cleaning Brush permits full 360 degree cleaning and remote operation with use of a shotgun stick. Simply lock the brush into a shotgun stick and push the “V” throat against the conductor to open the jaws and enclose the conductor. Now place the shotgun stick in the unlocked position but keep the conductor cleaner secured within the shotgun end. This will permit the operator to provide a full 360 degree cleaning action on the conductor. Stainless steel tension springs assure aggressive brush cleaning action to remove even the most stubborn oxide layer. 

When cleaning is completed return the shotgun stick to the locked position and pull off the conductor. If you are serious about obtaining a solid jumper or grounding connection our cleaning brushes are a must. 

Our conductor cleaners are machined from a tough weather resistant polymer. All hardware is stainless steel to provide years of trouble free service. Brush set replacement requires only a Phillips screwdriver.

 Conductor Cleaning Brush Details

The Last Word in Oxide Removal!

Conductor size range: #4 minimum through 750 MCM maximum C-clamp design
Product weight: 2.5 pounds
Product dimension: 12” x 5” x 5”

The Utility Solutions Small Conductor Cleaner Brush offers optimum conductor cleaning for the utility serious about achieving solid in-field grounding and jumper connections. The clamp comes supplied with two sets of wire brushes. One set of brushes is designed to work on conductor sizes ranging from 250 MCM to 750 MCM. Another set of brushes is designed to work on conductor sizes ranging from #4 to 250 MCM. All wire brushes are 5” in length. Brushes can be changed without the use of any tools. 

Product dimension: 2” outside diameter x 2”
Inside diameter: 1.25“
Product weight: 1.8 oz.

A skinning knife is not an easy tool to utilize for prolonged periods. The handle prevents ergonomic gripping especially with gloved hands. The Knife Ball is a simple yet effective tool that transforms any standard 1 “ skinning knife into an ergonomic tool that is comfortable to use over extended periods even while wearing gloves. The ridged surface also provides superior positive grip even in wet weather.

Product Dimensions: 6.5” x 6.5” x .5”
Product Weight: 5 oz.

The Utility Solutions Bucket-Mate is a nearly indestructible bucket hook that simply will not break even if exposed to cold temperature extremes. The Bucket- Mate is double ended allowing the large hook to accept a tool bag, while the
opposite smaller ½” end will accept blanket holes without damaging the blanket. This will be the last Bucket-Hook you ever have to purchase. 

Unlike conventional molded bucket hooks, the Utility Solutions Bucket-Mate is machined from high performance polymer sheet stock.

 Bucket-Mate Polymeric Hook Details

Virtually INDESTRUCTIBLE! (during routine use)

The Jumper-T series of tools allows for the safe usage of jumper operations, and acts as a portable connector terminal. This eliminates the need for a bulky expensive single length of cable and
allows for multiple smaller lengths of cable to be utilized.

The duckbill top clamp will work on conductor sizes ranging from #6 copper to 1033 MCM. The Jumper-T incorporates over 15” of metal-to-metal separation utilizing high performance closed cell foam filled electrical rated fiberglass.

The USJT-001 has a straight ½” dia. aluminum jumper bar.

The USJT-002 has a ¾” dia. aluminum bar bent into handle bar shape to allow for multiple jumper attachment points. This gives the lineman greater flexibility when attaching the jumper.

 Jumper T Details

Use Less Heavy Bulky Cable!

Product dimensions: 11” x 4.5” x .5”
Product weight: 6 oz.

The Jumper Hook is designed to prevent jumper cable sag and potential cross-phasing situations without the time consuming use of tape, bungee cord or rope. The jumper hook can be installed by gloved hand or utilizing a shotgun style stick. The Jumper Hook will fit over Class 2 or 3 line hose. The jumper Hook also helps minimize a jumper cable swaying in high winds. 

Simply hang multiple Jumper Hook units along the intended jumper cable path and let the lower portion of the Jumper Hook cradle the jumper cable. The Jumper Hook is manufactured from a nearly indestructible weather resistant high visibility safety yellow polymer. The Jumper Hook exhibits a flashover resistance of over 50 kV.

 Jumper Hook Details

No More Jumper Lead Sag!

The Grab-It™ offers an easy, simple and economical method to safely remove or install overhead fuse barrels. The Grab-It™ design provides positive control of the fuse barrel even in high wind conditions to prevent accidental drops. No need to find the fuse barrel pull ring or lifting eye which is difficult in low lighting conditions. Simply sweep behind the fuse barrel and lift. The Grab-It™ works as well at the end of a 50 ft telescopic as it does at the end of an 8 ft bucket stick. Requires no special stick movement or procedure to operate.

The Grab-It™ is machined from aircraft grade aluminum to provide years of trouble free operation. The Grab- It™ has no moving parts, no springs and no plastic parts to break.

 Grab-It™ Details

The Jack Jumper™ permits a safe and quick method to bypass an overhead cutout without the tedious use of bulky jumper cables. With the use of a shotgun stick place one end of the Jack Jumper™ on the arcing horn of the cutout. Pull down on the other end of the Jack Jumper™ and secure to the cradle end of the cutout. The bypass has been established! The tool is indispensable for fuse coordination tasks and permits easy bypass of an underground dip. The Jack Jumper™ saves time and money, eliminates risk of service interruption and prevents accidental cross phasing.

The Jack Jumper™ utilizes a stainless steel external spring to provide many years of trouble free field service.

To service a 200 Amp cutout simply add a second Jack Jumper™ to the opposite cutout horn.

 Jack Jumper™ Details

No More Jumper Cables!