Megger Digital Low Resistance Ohmmeters

• CAT IV 600 V AC / 500 V DC for safe operation
• Lightweight 100 A battery powered unit for portability
• High noise immunity for stable readings
• Smooth DC Output for circuit breaker testing
• IP54 for protection against dust and moisture whilst testing
• Save, download and delete results (100XB/HB variants)
• Remote operation, Bluetooth® & asset/result tagging (100HB variants)

The DLRO100 series of digital low-resistance micro-ohmmeters are portable, lightweight instruments that can deliver a test current of 100 A. They can be supplied with internal rechargeable Li-ion batteries that provide sufficient power for up to 200 manual/automatic tests on a single charge. This degree of autonomy makes it easy for you to perform high current low resistance testing in almost any location, including areas without access to a mains power supply.

There are three main models in the series, each has a battery and mains power supply:

• DLRO100EB is a battery and mains-operated unit.
• DLRO100XB is a battery and mains-operated unit. DualGround capability with optimal clamp and internal memory storage with USB drive download. 
• DLRO100HB is a battery and mains-operated unit. DualGround capability with optimal clamp and internal memory storage with USB drive download. Remote control, asset tagging and Bluetooth®.

DLRO100 Datasheet

Pressure Gauge Calibrator

Designed for field pressure calibration, the Fluke 700G Series Pressure Gauge Calibrators give you the performance and durability that you have come to expect in Fluke pressure calibration products while being simple and easy-to-use. Whether you’re looking to connect to either a hydraulic or pneumatic test pump this series are designed to be a complete calibration solution with:

• 23 pressure gauges from ±10 inH2O/20 mbar to 10,000 psi/690 bar

With a standard accuracy of 0.05% of full scale and reference class gauges with accuracies of 0.04% you’re sure to find a gauge that’s the perfect fit for your application.

Rubber Line Hose

Used to produce conductors during maintenance on energized overhead networks, protecting the electrician from accidental contacts. Available with or without connection nozzle.

Flexible Rubber Covers Datasheet

Three-Phase Power Logger

Electrical load studies, energy consumption testing, and general power quality logging
The Fluke 1735 Three-Phase Power Logger is the ideal electrician or technician’s tool for conducting energy studies and basic power quality logging. Set up the 1735 in seconds, with the included flexible current probes and color display. The 1735 logs most electrical power parameters, harmonics and captures voltage events.

• Record power and associated parameters for up to 45 days
• Monitor maximum power demand over user-defined averaging periods
• Prove the benefit of efficiency improvements with energy consumption tests
• Measure harmonic distortion caused by electronic loads
• Improve reliability by capturing voltage dips and swells from load switching
• Easily confirm instrument setup with color display of waveforms and trends
• Measure all three phases and neutral with included 4 flexible current probes
• View graphs and generate reports with included Power Log software
• Compact, rugged design with IP65 case, 600 V CAT III and two-year warranty

Fluke 1735 Datasheet

CAT IV Insulation testers

The MIT400/2 series of CAT IV insulation and continuity testers have been designed for use in an exceptionally wide range of applications including electrical installations, cable testing, motor testing, automotive, ESD, panel building, avionics and maintenance.

The MIT400/2 series enhances insultation testing with feedback-controlled test voltages to limit overvoltage to 2 %, rather than the industry standard 10 to 20 %. Additionally, a variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps, where application-specific test voltages are required that do not appear in the standard ranges.

Replacing the original MIT400 instruments, the new units feature a redesigned case, back stand, and 6 cell battery compartments with separate fuse access. All instruments are over-moulded for increased protection and achieve an IP54 weatherproof rating. What's more, the MIT400/2 makes continuity testing significantly faster, and a single auto-ranging 0.01 Ω to 1.0 MΩ function replaces the 'ohms' and 'kOhms' ranges. Retained are the 200 mA and 20 mA test options.

The range consists of four instruments:

• MIT400/2: 250 V, 500 V and 1000 V
• MIT410/2: 50 V, 100 V, 250 V, 500 V and 1000 V + Polarisation index, dielectric absorption ratio
• MIT420/2: 50 V, 100 V, 250 V, 500 V and 1000 V + Polarisation index, dielectric absorption ratio, variable test voltage and result storage
• MIT430/2: 50 V, 100 V, 250 V, 500 V and 1000 V + Polarisation index, dielectric absorption ratio, variable test voltage and Bluetooth download

Key Features:

• Insulation testing up to 1000 V and 200 GΩ range
• Stabilised insulation test voltage (New)
• Single range, faster continuity testing from 0.01 Ω to 1 MΩ (New)
• 600 V T RMS AC and DC voltage measurement
• Live circuit detection and protection
• User variable insulation test voltage from 100V to 1000V (New) depending on model
• Test result storage and Bluetooth® downloading depending on model
• Rechargeable options for mains and car charging (New)depending on model
• CAT IV 600 V and IP54

MIT400/2 Series Datasheet

Process Calibrator

Fluke 725Ex provides an intrinsically safe, simple and powerful multifunction calibration solution

The 725Ex is an intrinsically safe multifunction process calibrator for use in explosion endangered areas. It is powerful, yet easy to use. Combine the 725EX with any of the eight Fluke 750PEx Pressure Modules (sold separately), and you’ll be able to calibrate almost any process instrument likely to need service in an area where explosive gasses may be present.

The 725EX sources and measures almost all process parameters including mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules. Its split display lets you view input and output values simultaneously to calibrate transmitters. For valve and I/P tests, you can source mA while measuring pressure. The 725Ex has auto-stepping and auto-ramping for remote testing, plus 25% stepping for fast linearity tests.

From the moment you pick it up, the Fluke 725Ex is ready to perform. Its simple controls, without menus, make operation easy. Its memory functions make set up fast. And its rugged design lets it work as hard as you do.