You are here: Main
EVX100
Electric Vehicle Charge-Point Adaptor
Compact direct-connected adaptor for testing Mode 3 electric vehicle charge points
Used with Megger MFT-X1 multifunction installation testers, the EVX100 adaptor provides all the functions needed for automated and manual testing of single- and three-phase Mode 3 electric vehicle charge points rated at up to 22 kW. Unlike other adaptors, the EVX100 mounts directly onto the MFT, which means it provides a fully integrated solution that doesn’t need inconvenient interconnecting cables.
Another unique benefit is that the EVX100 is directly controlled by the MFT-X1, which makes it easier and faster to use. In addition, direct control reduces the possibility of making incorrect test selections. The EVX100 also confirms that the mode set on the charger is correct for the test being performed.
To make testing even more convenient, the EVX100 offers automated testing, which means that you will no longer have to manually cycle the charge point through numerous CP states every time a test trips a protective device such as an RCD or RDC. As protective devices are often fitted in locations at a considerable distance from the charge point, this feature can potentially save a lot of walking and valuable time.
The EVX100 is powered by a high capacity internal battery, which can be recharged quickly via a standard USB-C charging port. This means you won’t need mains cables with various types of plugs. Just two charger connectors – Type 1 and Type 2 – will almost certainly cover all of your testing requirements, with type 2 supplied as standard. And, if you’re a user of CertSuite Installation software, you can produce customised test certificates in real-time with just a couple of clicks.
MTO250
50 A transformer ohmmeter
- Capable of testing transformers up to 1000 MVA
- DC test current up to 50 A maximum
- Integrated demagnetisation feature
- Computer control and internal data storage
- Validates proper operation of on-load tap changers
- Protected against accidental current lead disconnection (through potential leads)
The MTO250 50 A transformer ohmmeter is a line-operated, field-portable instrument designed specifically to measure the resistance of all types of magnetic windings safely and accurately. It tests transformers, shunt reactors, and rotating machine windings, and it performs low resistance measurements on connections, contacts, and control circuits.
The dual set of potential inputs enables the resistance measurement of either two primary, two secondary windings, or of a primary plus a secondary winding simultaneously. This dual reading, dual injection characteristic, is a highly efficient method of completing tests in a timely manner.
Fluke 709
Precision mA Loop Calibrator
The Fluke 709 mA loop calibrator is designed to reduce the time it takes to measure or source voltage or current and power up a loop and still produce high-quality results. The Fluke 709 is built around a user friendly interface with a quick-set rotary encoder knob and best in class accuracy at 0.01% of reading. It features a protective holster that fits easily in a technician's hand and a large backlit display that is easy to read, even in dark, cramped work areas. So it's a great choice anywhere you need a compact, rich featured precision loop calibrator.
Other useful features:
- Provides resolution of 1 µA on mA ranges and 1 mV on voltage ranges
- Features a compact rugged design and runs on 6 standard AAA batteries
- Provides Auto Shutdown to conserve battery life (adjustable up to 30 minutes)
- Offers variable step and ramp time in seconds
- Provides adjustable span selection (0 to 20 mA or 4 to 20 mA)
- Includes valve test functionality (simulates defined mA values with % keys)
Key features
- mA precision loop calibrator with best-in-class accuracy at 0.01% reading
- Provides intuitive user interface with quick-set rotary encoder knob for fast setup
- Includes built in selectable 250 Ω resistor for HART communication
- Features 24 V DC loop power with mA Measure Mode (-25% to 125%)
- Requires only simple two wire connection for all measurements
MOM3
Handheld micro-ohmmeter
The MOM3 handheld 300 A micro-ohmmeter is purpose-built for measuring the resistance of critical electrical components such as circuit breaker contacts, busbar joints, and other high-current links. Its effectiveness in conducting these measurements is achieved using an ultracapacitor, a technology that distinguishes it from conventional capacitors. The size and great interface of the product makes it very practical in use for daily work on site.
The MOM3 micro-ohmmeter includes:
- Ultra Capacitor Technology: The MOM3 employs an ultracapacitor that can store a significant amount of energy compared to standard capacitors. This capability allows it to generate a very high output current during discharge, a crucial requirement for accurately measuring low resistances in high-current components.
- Low Internal Resistance: The ultra capacitor's low internal resistance ensures that the energy it stores is efficiently and effectively discharged, contributing to the micro-ohmmeter's high accuracy when measuring resistance.
Versatile Use: The MOM3 micro-ohmmeter is designed to be highly versatile, making it suitable for use in various settings. It can be employed anywhere to measure low resistance values with a high degree of accuracy, ensuring reliable results.
Fluke 28 II Ex
Intrinsically Safe True RMS Digital Multimeter
Now there's an intrinsically safe digital multimeter (DMM) you can use in a wide range of hazardous settings. Whether you work in petroleum, chemical, or pharmaceutical environments, the 28 II Ex gives high-end test and troubleshooting power you need is packed into the most rugged intrinsically safe (IS) DMM Fluke has ever built: drop-proof, waterproof, dust-proof (IP67).
Key features
- A completely sealed, IP67 rated case
- Withstands drops up to 10 ft or 3 m (with holster)
- Dustproof per IEC 60529 IP6x
- Waterproof per IEC 60529 IPx7
- CAT III 1000 V, CAT IV 600 V
- Reversible holster for added protection of the display when not in use
Fluke 375
Fluke 375 True RMS AC/DC Clamp Meter
Key features
- High performance clamp meter that measures very low voltage and high resistance
- Measures AC and DC current to 600 A, and AC and DC voltage to 1000 V
- Measures AC current to 2500 A AC with optional iFlex flexible current probe
Fluke 375 True-RMS AC/CD Clamp Meter measures very low voltage and very high resistance
The Fluke 375 delivers high performance features and ease of use. It features a VFD low-pass filter for accurate motor drive measurements.
The 375 offers most of the features of the Fluke 376 including compatibility with the iFlex flexible current probe but, unlike the 376, it does not include the iFlex® probe in the package. You can measure AC and DC current to 600 A and voltage up to 1000 V with the fixed jaw clamp. Or connect an optional iFlex® flexible current probe to expand your measurement range to 2500 A AC. The large diameter and flexible design of the iFlex probe make it easier to measure around large conductors in tight spaces or to access individual wires.
Versatile performance
With True-RMS AC voltage and current measurements, the 375 enables you to accurately troubleshoot non-linear signals. And you can log and trend measurements to pinpoint intermittents while you are performing other tasks.
Other useful capabilities:
- Compatible with optional TPAK magnetic hanging strap
- Comes with batteries, soft carrying case, and three-year warranty
- Features CAT III 1000 V, CAT IV 600 V safety rating
- Measures capacitance to 1000 µF
- Includes True-RMS voltage and current measurements to accurately measure non-linear signals
- Measures frequency to 500 Hz and resistance to 60 kΩ with continuity detection
- Includes Min/Max/Avg and inrush recording to capture variations automatically
- Offers 500 mV DC measurement range to interface with other accessories
- Runs on two AA alkaline batteries
ULIRVISION TD100
Mini UV Camera
After our innovation updates, new items are launched—TD100 mini UV camera. ULIRVISION TD100 is an innovative NDT - Non-Destructive Testing equipment, which detects, pinpoints and documents flash-arc corona and arcing partial discharge camera. Equipped with high sensitivity, it is a powerful tool to detect UV emission in full daylight with high signals from faraway and nearby sources.
TD100 UV digital camera is a preferable predictive maintenance device for overhead transmission lines and high voltage substations. It has a wide range of use in different areas, such as Transmission line inspection, electrical utilities, HV research institutes, HV electrical component inspection, etc. Therefore, whatever the usage you need, TD100 UV digital camera can always satisfy you and help you solve the special problem!
Features
- High sensitivity up to 2.2 × 10-18watt / cm2
- Noise interference is small, using solar-blind detector
- Accurate superposition and positioning of the whole area of ultraviolet and visible light
- Hand-held inspection, easy to complete the inspection
- Synchronous focusing of ultraviolet and visible light
- SD card online upgrade function
- High integration and low power consumption
- Professional report analysis software, more conducive to on-site situation analysis
- Small size, light weight, easy to operate
TD100 Mini UV Camera Datasheet
Page 2 of 31
 |
 |
 |
 |
 |
 |
Megger Transformer Catalogue
Megger Cable Catalogue
Industrial Maintenance Catalog 2024
2024 Electrical Testing Expert Catalog
2023 Electrical Test Equipment Catalog
Megger Power Catalog
Merytronic
Portable Devices
Fluke SEA 2023 - 2024 Product Guide
Solucao Product Catalog
Orion Electrical Safety Rubber Equipments Catalogs
BETE Electrical Construction Tools 2025
MULTI Main Sales Product Line 2024
ANHU Electric Catalog
