Electronic Recloser Test Simulator

The Megger Model ERTS, Electronic Recloser Test Simulator unit, is designed to interconnect to Megger Models MPRT, SMRT, and FREJA 400/500 relay test systems for easy field testing of electronically controlled reclosers. The ERTS has 14, 19 and 32 pin cable adapters to directly interface with the most common forms of reclosers such as the G&W Viper®, Elastimold® MVR, with SEL 351R and SEL 651R, and Cooper Forms 4, 5 and 6 reclosers.

• Rugged, Small, Light Weight, Field Portable
• 14, 19, and 32 pin Cable Adapters Built-in
• Used with Megger Relay Test Systems
• Simulate Three-Pole or Single-Pole Trip and Reclose
• Use Sequencer Test to Easily Perform Trip and Reclose Tests on both Electronic Controller and Recloser

ERTS Datasheet

Flexible Leakage/Line Current Tester

Features

• Low-pass filter equipped, it can be cut the noise which is over 150Hz frequency.
• Even Coreless Coil but Least Influence from External Magnetic Field and Residual Current
• Superior Flexible CT enables Leakage Current Measurement
• Backlight Function useful for measurement in the dark place

Note:The shape of the CT sensor fitting part has been changed.
It cannot be used by connecting the old and new.

Multi RLM-10+ Datasheet

Portable two-channel time domain reflectometer

The Teleflex SX-1 is a portable two-channel time domain reflectometer (TDR) designed to provide quick, effective, accurate, and safe pre-location of faults in cable installations. It supports all high-voltage pre-location methods, comes with multi-shot technology with 15 fault traces per arc reflection shot, and can be operated on its own or in conjunction with surge wave generators (thumpers).

You can operate the instrument via a single jog dial and an intuitive software interface on a large, bright, colour touch screen display. This makes operating the unit easy, comfortable, and intuitive and supports the rapid acquisition of accurate results.

What's more, the Teleflex SX-1 enables flexible working as it can be powered by its own a rechargeable battery or it can use the mains supply via a smart charger.

• Standalone operation or operation in conjunction with surge wave generators (thumpers)
• Single jog dial operation with piechart interface and 'No-User-Intervention Auto mode' ARM
• Multi-shot technology with 15 fault traces per arc reflection shot
• ProRange distance-dependent de-attenuation for significantly improved images of far-away reflections
• Supports all existing HV pre-location methods
• 'Auto-ranging' cable end recognition, 'Auto-find' cursor to fault position
• Rugged, robust, outdoor field-ready case

Teleflex SX-1 Datasheet

Hand-held 200 A micro-ohmmeter

• Up to 220 A
• Battery powered
• Weighs only 1 kg
• Safe testing with DualGround™
• Auto range: 1 μΩ to 1000 mΩ
• Bluetooth® PC communication
• Complies with IEEE and IEC standards

The MOM2 handheld 200 A micro-ohmmeter has been designed to measure the resistance of circuit breaker contacts, busbar joints, and other high current links. To do this effectively, it uses an ultra capacitor to generate its high output current. This ultra capacitor is able to store a huge amount of energy compared to conventional capacitors and can deliver a very high current during discharge thanks to its very low internal resistance.

This micro-ohmmeter can be used anywhere to measure a low resistance value with high accuracy. What's more, with the MOM2, it is possible to make measurements according to the DualGround method, meaning that the test object will be grounded on both sides throughout the test providing you with a safer, faster, and easier testing experience.

MOM2 Datasheet

Smart Control Valve Testing is now easier than ever

The Fluke 710 Valve Testing Loop Calibrator is designed to enable users to perform quick, easy tests on HART smart control valves. Featuring built-in test procedures and an intuitive user interface, the 710 allows users to quickly and easily perform valve tests, while the valve test quick-check results provide at-a-glance diagnostics help you make maintenance decisions faster than ever. The valve health quick-check results let you know whether your valve is in good, marginal or in bad operating condition so you can quickly decide whether additional maintenance is necessary.

Valve testing and HART communication in a precision loop calibrator

With the 710 Valve Testing Loop Calibrator’s built in HART communication function, users can source a 4-20 mA signal to cause the smart control valve to move, while simultaneously interpreting the valve’s HART feedback signal to determine whether the valve is moving to the expected position. In addition to positional information, the measured pressure delivered from the valve’s internal I/P (which moves the valve) can be determined through the HART communication protocol.

The 710 has built-in test procedures that automatically increase and change the mA signal while monitoring the HART position and pressure feedback from the control valve, giving you a better overall picture of valve health at the simple push of a button.

Pre-configured valve tests, at-a-glance answers

Valve test routines built into the 710 include:

• Manual testing; manually change the mA signal and view the HART position and pressure variable information
• Full range ramping of the mA signal from 4 to 20 to 4 mA while recording the 0-100-0% position, or the pressures applied that move the valve from 0-100-0%
• Stepping the mA signal on the input to the valve in steps and evaluating the valves response to the mA input changes
• Speed tests to determine how fast the valve can open or close
• Bump and partial stroke tests that help test valves over a portion of their range so they can be tested in a live process

Fluke 710 mA Loop Valve Tester

Vibration Meter

One-button vibration assessment of mechanical equipment